BXJWX - G-N METAL ASSEMBLY PASTE

  • MSDS: BXJWX
  • Manufacturer: DOW CORNING CORP
  • Product Name: G-N METAL ASSEMBLY PASTE
  • National Stock Number: 9150-01-047-9668
Product Identification

Product ID:G-N METAL ASSEMBLY PASTE
MSDS Date:04/25/1990
FSC:9150
NIIN:01-047-9668
MSDS Number: BXJWX

Responsible Party
DOW CORNING CORP
S SAGINAW RD
MIDLAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-6000

Preparer: JACK L SHENEBERGER

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

MINERAL OIL, WHITE

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: 48%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


MOLYBDENUM SULFIDE; (MOLYBDENUM DISULFIDE)

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: 17%

OSHA PEL 5 MG MO/M3

ACGIH TLV: 5 MG MO/M3


SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1 - 5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3


ZINC PYROPHOSPHATE

CAS: 7446-26-6

Fraction By Weight: 14%

OSHA PEL N/K

ACGIH TLV: N/K


CALCIUM PHOSPHATE

CAS: 7758-87-4

Fraction By Weight: 13%

OSHA PEL N/K

ACGIH TLV: N/K


ETHYLENE-BIS-STEARAMIDE

CAS: 110-30-5

Fraction By Weight: 3%

OSHA PEL N/K

ACGIH TLV: N/K


TRIALUMINUM PHOSPHATE

CAS: 13530-50-2

Fraction By Weight: 2%

OSHA PEL N/K

ACGIH TLV: N/K


PROPENE, 2-METHYL-, POLYMERS; (POLYISOBUTYLENE)

CAS: 9003-27-4

RTECS: UD1010000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:DIRECT CONTACT IRRITATES
SLIGHTLY WITH REDNESS AND SWELLING. SKIN:SEVERAL REPEATED PROLONGED
EXPOSURES (24-48 HRS) MAY IRRITATE. INHALATION:IRRITATES
RESPIRATORY PASSAGES AND EYES VERY SLIGH TLY. INGESTION:SWALLOWING
LARGE AMOUNTSMAY CAUSE DIGESTIVE DISCOMFORT. THIS PRODUCT, AS WITH
ANY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CHEMICAL, MAY ENHANCE ALLERGIC
CONDITION ON CERTAIN PEOPLE. NO INJURY FROM DUSTS SHOULD OCCUR
DURING REASONABLE USE. IF USE CREATES RESPIRABLE PARTICLES, SOME
RESPIRATORY SYSTEM INJURY MAY OC CUR.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH WITH WATER FOR
@ LEAST 15 MINUTES. SKIN:WIPE OFF AND FLUSH WITH WATER. WASH WITH
MILD SOAP SOLUTION OR WATERLESS SKIN CLEANER.

Fire Fighting

Flash Point Method:OC
Flash Point:>250F,>121C
Extinguishing Media:WATER FOG, CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS SULFUR OXIDES FORM.

Accidental Release

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE REASONABLE CARE & CAUTION. THESE
PRECAUT ARE FOR ROOM TEMP HNDLG; USE @ ELEVATED TEMP, OR
AEROSOL/SPRAY APPLIC, MAY REQ ADDED PRECAUTIONS.
Other Precautions:GOOD PRACTICE REQ THAT GROSS AMT OF ANY CHEM BE
REMOVED FROM SKIN AS SOON AS PRACTICAL, ESPECIALLY BEFORE
EATING/SMOKING. AVOID EYE AND SKIN CONTACT.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL):RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASHING AT MEALTIME AND END OF SHIFT IS
ADEQUATE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V7
Vapor Pres:<5 @ 77F
Spec Gravity:1.38 @ 77F
Solubility in Water:<0.1
Appearance and Odor:VERY LITTLE ODOR, PASTE-LIKE, BLACK
Percent Volatiles by Volume:<5(WT)

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Hazardous Decomposition Products:METAL OXIDES, SULFUR OXIDES, SILICON
DIOXIDE, CARBON DIOXIDE & TRACES OF INCOMPLETELY BURNED CARBON
PRODUCTS.

Disposal

Waste Disposal Methods:MFR SUGGESTS THAT ALL LOCAL, STATE AND FEDERAL
REGULATIONS CONCERNING HEALTH & POLLUTION BE REVIEWED TO DETERM
APPRVD DISP PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.